Cold paint material is a cost-effective solution for executing flat markings over all types of pavements for use in repairments. Flat lines are mainly used in well-illuminated areas as urban roads for e.g. where the lines do not need high retroreflectivity levels.

Using the  Borum cold paint equipment you can obtain a high-quality line up to 20 or 25 cm in width depending on the equipment type, work conditions, application speed, layer thickness, wind, etc. You can increase equip the machine with 1-3 guns if choosing the standard Borum retainer or up to 5 guns if you opt for the wide Borum retainer. Furthermore, depending on the choice of material tanks, it is possible to apply lines in different colors at the same time.


Follow us on these social platforms