2-COMPONENT AIRLESS APPLICATION (98:2)
From city areas to urban and interurban roads, the BM 2000 can handle both smaller jobs and longer road stretches.The BM 2000 CP A is an agile machine with excellent load abilities and a turning radius of only 3,2 m. It allows for paint tank capacities of 440 L or 2 x 220 L.The BM 2000 has a one-seat slidable drive and operator section for flexible working on the left or right side.The application equipment can be set to execute lines between 10 - 30 cm. The equipment on this machine may be used for the application of flat lines in both single and double lines of different widths as well as for simultaneous application of continuous and interrupted lines.
Line types that can be applied with this equipment
Pulsation damper in the hydraulic oil circuit, which helps minimize piston pulsations. Sliding retainer frame, upon which 1 or 2 paint guns and 1 or 2 bead guns are attached. Easy slidable from side to side for an optimal working position.
Lifting of retainer is done from operator seat. Ground distance is maintained by retainer wheel to ensure a constant road marking width. The retainer makes it possible to use all application equipment in different positions on the machine.
Possibility to apply line widths up to 25 cm with standard nozzle depending on the nozzle choice, line thickness, work conditions, application speed and layer thickness.
Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.
Alarm when hardener does not flow during marking work. This helps to avoid non-cured markings to be applied. Alarm when there is a break in the marking works which is longer than set in the computer. This notifies you to clean the system before material cures inside the equipment.
Double-action piston pump for 98% paint and 2% hardener with two pistons for the paint and one piston for the hardener. The 3 pistons are driven by a common hydraulic motor in order to secure the right relation between paint and hardener. A static mixer is mounted close to the paint guns.
Efficient pump with less wear and tear than other products available on the market. The pump has a sensor for registration of the paint flow. The pump capacity (displacement volume) is up to 45 L/min (99 lb wt./ min).
The cleaning system is formed by a solvent tank for cleaning of mixer-head, hoses and paint guns. The system is activated via the Borum LineMaster computer. The cleaning process is an automated preset sequence ensuring the correct valves are opening/closing.
36L pressure solvent tank for cleaning of mixer-head, hoses and paint guns.
Stainless steel, max 8.5 bar.
NB! When working with 2-component whenever the application is stopped, application equipment has to be cleaned from the cold plastic mixture within a few minutes.
The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing.
It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types and different combinations to have them ready for marking, and can instantly adjust them on the go.
Furthermore, you are able to view the status of various parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.