The BM 5700 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways.

Line Types

Line types that can be applied with this equipment

Contact us about this product Download datasheet [uk]

ENGINE

  • Manufacturer : Deutz
  • Cooling : Water
  • RatedPower : 100 kW / 136 HP @ 2300 rpm
  • Cylinder : 4 stroke 3600 cm³
  • Type : Turbo (Diesel)
  • Approval : EU Stage V (TIER 4)

COMPRESSOR

  • Compressor Capacity : Hydraulic driven, air screw 2400 or 4500 L/min @ 10 bar. Integrated oil system with external oil cooler. Water separator.

FILLING CAPACITIES

  • Fuel tank capacity : 159 L (78 +81 L)
  • Hydraulic tank size : 120 L
  • Bead capacity : 330 L (2x 165 L). Pressurized (max 3 bars)

MATERIAL TANK

  • Material Tank : 2x 440 L or 1000 L

DRIVING PROPERTIES

  • Drive angle : 8° or 14% at 21 km/h, 17° or 30% at 11km/h
  • Turning radius : 4.9 m
  • Steering : Hydraulic dual torque steering

TRANSMISSION

  • Hydrostatic transmission : For variable speed, forward/backwards
  • Speed : Low gear 0-12 km/h, high gear 0-24 km/h

ELECTRICAL SYSTEM

  • Electrical system : 24 V / 100 Amp

CONTROL UNIT

  • Borum LineMaster : Program up to 99 different line types. Organise lines in up to 30 marking programs. 8" display. Transfer of daily marking reports. Data about road marking jobs can be accessed online (optional).

COLOUR

  • Colour : Borum Yellow (Other colours available on request)

DIMENSIONS

  • Length : 5350 mm
  • Width : 1300 mm
  • Height : 2250 mm (Without Beacon)

MATERIAL TANK FOR COLD PAINT, PRESSURIZED

Pressurized black steel tank for solvent - based cold paint.The material tank has a filling system with large filling holes. This makes the filling process very easy to manage. In addition, the large filling holes also make cleaning the tanks easy.Agitator (mixer) Driven by hydraulic motor and with manually operated reversing valve.

STAINLESS TANK (OPTION)

Pressurized material tank and filters in stainless steel for water and ammonium based paints.

PRESSURIZED COLD PAINT EQUIPMENT

The Borum cold paint application equipment can be set to execute lines in widths of 8-100 cm and with multiple colours.

Retainer

Sliding retainer frame, upon which 1-5 paint guns and 1-5 bead guns are attached. Easily slidable from side to side for an optimal working position.Ground distance is maintained by retainer wheel to ensure a constant road marking width.Lifting of retainer is done from operators seat. Pneumatic cylinder, foundation and pneumatic solenoid valve.Paint filter with cut-off valve for easy maintenance.Can be equipped with multiple material tanks, so that multi-color marking can be carried out simultaneously.Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type and operator experience.

BM C6 COLD PAINT GUN

High-performance spray gun. with a 6 mm nozzle set for water-based, solvent-based and high solid paints. The BM C 6 gun can work with paint marking pressure up to approx. 8 bar.Air capacity of 300-700 L/min. is needed per gun.Possibility to apply lines in widths from 8 to 20 cm with one gun depending on work conditions, nozzle size, application speed, and layer thickness. Line thickness is typically between 0.25 mm to 0.80 mm.

COLD PAINT FEATURES

Cold paint material is a cost-effective solution for executing flat markings over all types of pavements and for use in repairments. Flat lines are mainly used in well-illuminated areas as urban roads for e.g. where the lines do not need high retroreflectivity levels. Although drying time different between types of paints, it is usually quite long and cones and traffic management might be needed.

CLEANING SYSTEM

10L pressure solvent tank for cleaning of hoses and paint guns.

LineMaster features

The Borum LineMaster control unit is an easy way of setting and controlling your line marking jobs. The LineMaster is attached to the operator's section of the machine and gives you full control of all your line marking tasks, from line application and pre-marking to reporting and invoicing. It is possible to store up to 99 different line types, and to arrange these in up to 30 different marking programs. You are also able to pre-set line widths, line types and different combinations to have them ready for marking, and can instantly adjust them on the go.Furthermore, you are able to view the status of various parts of the machine (e.g. compressor) on the computer screen that will help with correctly maintaining the machine and avoiding break downs.

DIMENSIONS

KNOWING THE BM 5500

Pointer turning with steering

With hydraulic lifting system

Fixed pointer

With hydraulic lifting system

Sunshade with 1 rotating light

Remote control for BM LineMaster

Bead alarm mounted on bead gun

Air drier for bead tank

Ejector filling of bead tank

Hydraulic broom

Airknife

Cone holder

Bar with pneumatic lift for mounting warning lights

(Comes without lights)

Pre-marking system with paint can

Pre-marking system with paint gun

BM Online

Hand paint gun

BORuM ON SOCIAL MEDIA

Follow us on these social platforms